#Profibus_DP
;
; Historie:
; =========
;
; V5.9 28.11.05 La "45.45_supp" ergänzt und MaxTsdr angepasst
;
GSD_Revision        = 1
;
Vendor_Name         = "Fiessler Elektronik"
Model_Name          = "FPSC-Profibus-DP"
Revision            = "V5.9"
Ident_Number        = 0x2079
Protocol_Ident      = 0
Station_Type        = 0
FMS_supp            = 0
Hardware_Release    = "Revision I"
Software_Release    = "V5.0"
OrderNumber	    = "V2079"
;
9.6_supp            = 1
19.2_supp           = 1
45.45_supp          = 1
93.75_supp          = 1
187.5_supp          = 1
500_supp            = 1
1.5M_supp           = 1
3M_supp             = 1
6M_supp             = 1
12M_supp            = 1
;
MaxTsdr_9.6         = 15
MaxTsdr_19.2        = 15
MaxTsdr_45.45       = 15
MaxTsdr_93.75       = 15
MaxTsdr_187.5       = 15
MaxTsdr_500         = 15
MaxTsdr_1.5M        = 20
MaxTsdr_3M          = 35
MaxTsdr_6M          = 50
MaxTsdr_12M         = 95

Redundancy          = 0
Repeater_Ctrl_Sig   = 2
24V_Pins            = 0
Implementation_Type = "VPC3+B"
Bitmap_Device	    = "DAGW"
;
Freeze_Mode_supp    = 1
Sync_Mode_supp      = 1
Auto_Baud_supp      = 1
Set_Slave_Add_supp  = 0
Min_Slave_Intervall = 1
Modular_Station     = 1
Max_Module          = 16
Max_Input_Len       = 244
Max_Output_Len      = 244
Max_Data_Len        = 488
Modul_Offset        = 0
;
Fail_Safe           = 0
Slave_Family        = 9
Max_Diag_Data_Len   = 8
;
Module 		    = "1 Byte I/O (konsistent)" 0xB0
EndModule
Module 		    = "2 Byte I/O (konsistent)" 0xB1
EndModule
Module 		    = "4 Byte I/O (konsistent)" 0xB3
EndModule
Module 		    = "8 Byte I/O (konsistent)" 0xB7
EndModule
Module 		    = "16 Byte I/O (konsistent)" 0xBF
EndModule
Module 		    = "16 Worte I/O (konsistent)" 0xFF
EndModule
Module 		    = "32 Worte I/O (konsistent)" 0xFF,0xFF
EndModule
Module 		    = "64 Worte I/O (konsistent)" 0xFF,0xFF,0xFF,0xFF
EndModule
Module 		    = "122 Worte In" 0x5F,0x5F,0x5F,0x5F,0x5F,0x5F,0x5F,0x59
EndModule
Module 		    = "122 Worte Out" 0x6F,0x6F,0x6F,0x6F,0x6F,0x6F,0x6F,0x69
EndModule
;
Module 		    = "1 Byte Inp. 1 Byte Outp. (kons.)" 0x90,0xA0
EndModule
Module 		    = "8 Byte Inp. 8 Byte Outp. (kons.)" 0x97,0xA7
EndModule
Module 		    = "16 Byte Inp. 16 Byte Outp.(kons)" 0x9F,0xAF
EndModule
Module 		    = "16 Wort Inp. 16 Wort Outp.(kons)" 0xDF,0xEF
EndModule
;